Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001EPFF |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
-
Use the same procedure for the RH and LH sides.
-
The procedure described below is for the LH side.
PROCEDURE
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
(a) Pass the wire harness into the vehicle and install the grommet.
|
Install in this Direction
|
(b) Align the guide and pin to set the rear combination light assembly LH.
*a
|
Pin
|
*b
|
Guide
|
|
Push in this Direction
|
(c) Push the rear combination light assembly LH towards the vehicle front to attach the pin and guide.
(d) Install the 2 screws.
|
|
(e) Insert your hand between the deck trim side panel assembly LH and the body and connect the connector.
|
|
2. INSTALL REAR COMBINATION LIGHT COVER LH
(a) Attach the claw to install the rear combination light cover LH.
|
Install in this Direction
|
3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Return the rear side of the deck trim side panel assembly LH to its original position.
Click here
4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
Click here
5. INSTALL REAR FLOOR FINISH PLATE
Click here
6. INSTALL REAR NO. 3 FLOOR BOARD
Click here
7. INSTALL DECK BOARD ASSEMBLY
Click here
|