Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001EPEH |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 - 08/2020] |
Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY (for Triple Beam Headlight): INSTALLATION; 2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020] |
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
-
Use the same procedure for the RH and LH sides.
-
The procedure described below is for the LH side.
PROCEDURE
1. INSTALL HEADLIGHT ASSEMBLY LH (w/o Headlight ECU)
(a) Connect the 3 connectors and attach the 2 wire harness clamps.
|
|
(b) Set the headlight assembly LH in the direction indicated by the arrow (1) to the vehicle.
*a
|
Lower Bracket
|
|
Place Hands Here
|
|
Install in this Direction (1)
|
|
Install in this Direction (2)
|
(c) Slide the headlight assembly LH in the direction indicated by the arrow (2) and attach the guide and lower bracket.
(d) Place your hand on 2 brackets of the headlight assembly LH to set them on the screw seats.
NOTICE:
Be careful not to break the bracket.
(e) Install the bolt and 3 screws.
Torque:
for Bolt :
5.4 N·m {55 kgf·cm, 48 in·lbf}
|
Screw
|
|
Bolt
|
2. INSTALL HEADLIGHT ASSEMBLY LH (w/ Headlight ECU)
(a) Connect the connector and lock the connector lock lever under the headlight assembly LH.
*a
|
Lower Bracket
|
*b
|
Connector Lock Lever
|
|
Place Hands Here
|
|
Install in this Direction (1)
|
|
Install in this Direction (2)
|
(b) Set the headlight assembly LH in the direction indicated by the arrow (1) to the vehicle.
(c) Slide the headlight assembly LH in the direction indicated by the arrow (2) and attach the guide and lower bracket.
(d) Place your hand on 2 brackets of the headlight assembly LH to set them on the screw seats.
NOTICE:
Be careful not to break the bracket.
(e) Install the bolt and 3 screws.
|
Screw
|
|
Bolt
|
Torque:
for Bolt :
5.4 N·m {55 kgf·cm, 48 in·lbf}
3. INSTALL FRONT BUMPER ASSEMBLY
4. PERFORM SYSTEM INITIALIZATION AND CALIBRATION
Click here
5. ADJUST HEADLIGHT AIMING
Click here
|