| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EKPE |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): ABS does not Operate; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
|
ABS does not Operate |
DESCRIPTION
When the electronically controlled brake system is operating, as the input piston and output piston are not directly connected, the kickback of the brake pedal is minimal during ABS operation and the driver may not notice that ABS operated.
CAUTION / NOTICE / HINT
NOTICE:
When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): UTILITY](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
BRAKE PROBLEM CHECK |
(a) Check if the slip indicator light was illuminated or blinking when ABS did not operate.
HINT:
- When the VSC system is normal and ABS is operating, the slip indicator light blinks.
- When the VSC system is malfunctioning, the slip indicator light illuminates.
|
Result |
Proceed to |
|---|---|
|
The slip indicator light was blinking. |
A |
|
The slip indicator light was illuminated. |
B |
| A |
|
END |
|
|
2. |
PERFORM OPERATION CHECK DRIVING |
(a) Check that ABS operates using a drum tester or equivalent.
CAUTION:
When using a drum tester, enter Inspection Mode or VSC off mode and perform inspection with the TRC (TRAC) and VSC systems disabled to prevent the vehicle from moving suddenly due to TRC (TRAC) or VSC operation.
Click here
OK:
ABS operates.
| OK |
|
END |
| NG |
|
REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY
|
|
|