| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EF6L |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: EXTERIOR PANELS / TRIM: REAR DOOR BELT MOULDING: INSTALLATION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- Use the same procedure described for the LH side.
PROCEDURE
1. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH
Click here
![2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; DOOR / HATCH: REAR DOOR: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
2. INSTALL REAR DOOR QUARTER WINDOW GLASS LH
Click here
3. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH
Click here
4. INSTALL REAR DOOR GLASS RUN LH
Click here
5. INSTALL REAR DOOR BELT MOULDING LH
(a) Attach the claw to install the rear door belt moulding LH.
|
Install in this Direction |
(b) Remove the protective tape.
6. INSTALL REAR DOOR FRAME GARNISH LH
Click here
7. INSTALL REAR DOOR SERVICE HOLE COVER LH
Click here
8. INSTALL REAR DOOR REAR BELT SEAL LH
Click here
9. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH
Click here
10. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
Click here
11. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
Click here
12. INSTALL DOOR ASSIST GRIP COVER LH
Click here
13. INSTALL REAR DOOR INSIDE HANDLE BEZEL LH
Click here
14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
(a) for A25A-FXS:
Click here
(b) for A25A-FKS:
Click here
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here
15. INSTALL BATTERY HOLE COVER (for HV Model)
Click here
16. INSTALL REAR NO. 2 FLOOR BOARD (for HV Model)
Click here
17. INSTALL DECK BOARD ASSEMBLY (for HV Model)
Click here
18. INITIALIZE POWER WINDOW CONTROL SYSTEM
Click here
19. CHECK POWER WINDOW CONTROL SYSTEM
Click here
20. CHECK POWER DOOR LOCK CONTROL SYSTEM
Click here
|
|