Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001EF41
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 - 12/2021]
Title: MIRROR (EXT): OUTER MIRROR SWITCH: INSPECTION; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021]

INSPECTION

PROCEDURE

1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)

(a) Check the mirror select switch and mirror adjust switch.

(1) Select the mirror select switch to the L position.

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for left side):

Tester Connection

Condition

Specified Condition

20 (VL) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

20 (VL) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

21 (HL) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

21 (HL) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.

(3) Select the mirror select switch to the R position.

(4) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for right side):

Tester Connection

Condition

Specified Condition

18 (VR) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

18 (VR) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

23 (HR) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

23 (HR) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.

*1

Mirror Adjust Switch

*2

Mirror Select Switch

*a

Component without harness connected

(Outer Mirror Switch Assembly)

2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)

(a) Check the mirror retract switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

13 (B) - 11 (MF)

9 (E) - 12 (MR)

Return position

Below 1 Ω

13 (B) - 11 (MF)

9 (E) - 12 (MR)

Driving position

10 kΩ or higher

9 (E) - 11 (MF)

Retract position

Below 1 Ω

If the result is not as specified, replace the outer mirror switch assembly.

*1

Mirror Retract Switch

*2

Mirror Adjust Switch

*3

Mirror Select Switch

*a

Component without harness connected

(Outer Mirror Switch Assembly)

(b) Check the mirror select switch and mirror adjust switch.

(1) Select the mirror select switch to the L position.

(2) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for left side):

Tester Connection

Condition

Specified Condition

20 (VL) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

20 (VL) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

21 (HL) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

21 (HL) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.

(3) Select the mirror select switch to the R position.

(4) Measure the resistance according to the value(s) in the table below.

Standard Resistance (for right side):

Tester Connection

Condition

Specified Condition

18 (VR) - 13 (B)

19 (M+) - 15 (E)

Up

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

18 (VR) - 15 (E)

Down

Below 1 Ω

Off

10 kΩ or higher

23 (HR) - 13 (B)

19 (M+) - 15 (E)

Left

Below 1 Ω

Off

10 kΩ or higher

19 (M+) - 13 (B)

23 (HR) - 15 (E)

Right

Below 1 Ω

Off

10 kΩ or higher

If the result is not as specified, replace the outer mirror switch assembly.