| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EF3P |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: MIRROR (EXT): OUTER REAR VIEW MIRROR: INSTALLATION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
|
(a) Attach the claw and guide to set the outer rear view mirror assembly LH. NOTICE: Hold the outer rear view mirror assembly LH with one hand so that it does not drop. |
|
(b) Install the 3 nuts to install the outer rear view mirror assembly LH in the order shown in the illustration.
Torque:
5.5 N·m {56 kgf·cm, 49 in·lbf}
2. INSTALL OUTER MIRROR INSTALL HOLE COVER LH
|
(a) Attach the claw to set the outer mirror install hole cover LH. |
|
(b) Install the outer mirror install hole cover LH with the screw.
|
(c) Attach the clamp. |
|
(d) Connect the connector.
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Click here
![2019 - 2020 MY RAV4 RAV4 HV [11/2018 - 08/2020]; DOOR / HATCH: FRONT DOOR: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
4. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
Click here
5. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
Click here
6. INSTALL FRONT DOOR ASSIST GRIP COVER LH
Click here
7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH
Click here
8. PERFORM SYSTEM INITIALIZATION AND CALIBRATION (w/ Panoramic View Monitor System)
(a) for HV Model:
Click here
(b) for Gasoline Model:
Click here
|
|