| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EB24 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - ] |
| Title: A25A-FKS (BATTERY / CHARGING): GENERATOR (for VALEO Made): INSTALLATION; 2019 - 2024 MY RAV4 [11/2018 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL GENERATOR ASSEMBLY
(a) Install the generator assembly with the bolt and 2 nuts.
Torque:
25 N·m {255 kgf·cm, 18 ft·lbf}
(b) Install the wire harness clamp bracket to the generator assembly with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(c) Connect the wire harness to terminal B with the nut.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
(d) Close the terminal cap.
(e) Connect the generator assembly connector.
2. INSTALL V-RIBBED BELT
Click here
![2019 - 2024 MY RAV4 [11/2018 - ]; A25A-FKS (ENGINE MECHANICAL): DRIVE BELT: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. INSTALL INLET AIR CLEANER ASSEMBLY
Click here
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here
|
|