| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EACP |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): C1300; Skid Control ECU Malfunction; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
|
DTC |
C1300 |
Skid Control ECU Malfunction |
DESCRIPTION
The skid control ECU (brake booster with master cylinder assembly) stores this DTC if malfunctions are found in the circuit inside the ECU by self diagnosis.
|
DTC No. |
Detection Item |
INF Code |
DTC Detection Condition |
Trouble Area |
Note |
|---|---|---|---|---|---|
|
C1300 |
Skid Control ECU Malfunction |
|
Skid control ECU (Brake booster with master cylinder assembly) internal malfunction |
Skid control ECU (Brake booster with master cylinder assembly) |
- |
PROCEDURE
|
1. |
REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY |
(a) Replace the skid control ECU (brake booster with master cylinder assembly).
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; BRAKE SYSTEM (OTHER): BRAKE BOOSTER (w/o Vacuum Brake Booster): REMOVAL](/t3Portal/stylegraphics/info.gif)
(b) Perform initialization and calibration of the linear solenoid valve.
Click here
Chassis > ABS/VSC/TRAC > Utility
|
Tester Display |
|---|
|
ECB Utility |
(c) Perform zero point calibration of the yaw rate and acceleration sensor.
Click here
Chassis > ABS/VSC/TRAC > Utility
|
Tester Display |
|---|
|
Test Mode |
(d) Perform the sensor check in Test Mode Procedure.
Click here
Chassis > ABS/VSC/TRAC > Utility
|
Tester Display |
|---|
|
Signal Check |
| NEXT |
|
END |
|
|