| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001EABZ |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 12/2021] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): C1257; Power Supply Drive Circuit; 2019 - 2021 MY RAV4 RAV4 HV [11/2018 - 12/2021] | ||
|
DTC |
C1257 |
Power Supply Drive Circuit |
DESCRIPTION
The skid control ECU (brake booster with master cylinder assembly) detects a drop in accumulator pressure according to the signals from the accumulator pressure sensor, then operates and stops the motor relay as well as the pump motor.
The skid control ECU (brake booster with master cylinder assembly) troubleshoots the built-in motor relay drive circuit, and stores this DTC when a malfunction is detected.
|
DTC No. |
Detection Item |
INF Code |
DTC Detection Condition |
Trouble Area |
Note |
|---|---|---|---|---|---|
|
C1257 |
Power Supply Drive Circuit |
361 362 |
|
Skid control ECU (Brake booster with master cylinder assembly) |
- |
CAUTION / NOTICE / HINT
NOTICE:
When replacing the skid control ECU (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve.
Click here
![2019 MY RAV4 RAV4 HV [11/2018 - 02/2019]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster): UTILITY](/t3Portal/stylegraphics/info.gif)
HINT:
When C1241, C1242 and/or C1253 are output together with C1257, inspect and repair the trouble areas indicated by C1241, C1242 and/or C1253 first.
for C1241 and C1242: Click here
for C1253: Click here
PROCEDURE
|
1. |
REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY |
(a) Replace the skid control ECU (brake booster with master cylinder assembly).
Click here
| NEXT |
|
END |
|
|