| Last Modified: 01-30-2024 | 6.11:8.1.0 | Doc ID: RM100000001E8V1 |
| Model Year Start: 2019 | Model: RAV4 | Prod Date Range: [11/2018 - 10/2023] |
| Title: DOOR LOCK: BACK DOOR LOCK: INSTALLATION; 2019 - 2023 MY RAV4 RAV4 HV [11/2018 - 10/2023] | ||
INSTALLATION
PROCEDURE
1. INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/o Power Back Door)
NOTICE:
When installing a new back door lock with courtesy light switch assembly, if there are any strings attached to it, cut the strings off.
(a) Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.
|
(b) Temporarily install the bolt A. |
|
(c) Install the back door lock with courtesy light switch assembly with the 3 bolts in the order shown in the illustration.
Torque:
7.0 N·m {71 kgf·cm, 62 in·lbf}
|
(d) Connect the connector. |
|
2. INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/ Power Back Door)
NOTICE:
When installing a new back door lock with courtesy light switch assembly, if there are any strings attached to it, cut the strings off.
(a) Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.
(b) Temporarily install the bolt A.
|
*a |
Bolt A |
|
Bolt |
|
Connector |
(c) Install the back door lock with courtesy light switch assembly with the 4 bolts in the order shown in the illustration.
Torque:
7.0 N·m {71 kgf·cm, 62 in·lbf}
(d) Connect the 2 connectors.
3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY
Click here
![2019 - 2023 MY RAV4 RAV4 HV [11/2018 - 10/2023]; DOOR / HATCH: BACK DOOR: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
4. INSTALL BACK DOOR GRIP BASE
Click here
5. INSTALL BACK DOOR GRIP
HINT:
Use the same procedure described for the back door grip base.
6. INSTALL BACK DOOR SIDE GARNISH LH
Click here
7. INSTALL BACK DOOR SIDE GARNISH RH
HINT:
Use the same procedure described for the LH side.
8. INSTALL BACK DOOR CENTER GARNISH
Click here
9. INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)
(a) for Gasoline Model:
Click here
(b) for HV Model:
Click here
10. INITIALIZE POWER BACK DOOR SYSTEM (w/ Power Back Door)
(a) for Gasoline Model:
Click here
(b) for HV Model:
Click here
|
|