Last Modified: 01-30-2024 |
6.11:8.1.0 |
Doc ID: RM100000001E7N6 |
Model Year Start: 2019 |
Model: RAV4 |
Prod Date Range: [11/2018 -
] |
Title: PARK ASSIST / MONITORING: REAR CROSS TRAFFIC ALERT BUZZER: REMOVAL; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 - ] |
REMOVAL
PROCEDURE
1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Click here
2. REMOVE REAR SEAT CUSHION LOCK HOOK
Click here
3. REMOVE REAR SEATBACK ASSEMBLY LH
Click here
4. REMOVE REAR DOOR SCUFF PLATE LH
Click here
5. REMOVE NO. 3 BATTERY SERVICE COVER BOARD (for HV Model)
Click here
6. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH
Click here
7. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
Click here
8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT:
Pull back the rear door opening trim weatherstrip LH so that the rear seat side garnish LH can be removed.
Click here
9. REMOVE REAR SEAT SIDE GARNISH LH
Click here
10. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
Click here
11. REMOVE DECK BOARD ASSEMBLY
Click here
12. REMOVE REAR NO. 3 FLOOR BOARD
Click here
13. REMOVE REAR FLOOR FINISH PLATE
Click here
14. REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE
Click here
15. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
Click here
16. REMOVE TETHER ANCHOR BRACKET SET
Click here
17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
Click here
18. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH
Click here
19. REMOVE BLIND SPOT MONITOR BUZZER
HINT:
Perform the following procedure only when replacement of a blind spot monitor buzzer is necessary.
(a) Using a clip remover, detach the clamp and remove the blind spot monitor buzzer.
|
Protective Tape
|
HINT:
Tape the clip remover tip before use.
(b) Disconnect the connector.
|