Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001E6LA
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): SPEED SENSOR: REMOVAL; 2019 - 2024 MY RAV4 [11/2018 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during transmission revolution sensor (NT) and transmission revolution sensor (NC) removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

Transmission valve body assembly

  • Perform reset memory
  • Reset transaxle compensation code
  • Perform road test to allow ECM to learn
  • Large shift shock
  • Deterioration of fuel efficiency

for Initialization: 2019 - 2024 MY RAV4 [11/2018 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE SYSTEM: INITIALIZATION

for Registration: 2019 - 2024 MY RAV4 [11/2018 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): AUTOMATIC TRANSAXLE SYSTEM: REGISTRATION

PROCEDURE

1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

Click here 2019 - 2024 MY RAV4 [11/2018 -        ]; UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE): VALVE BODY ASSEMBLY: REMOVAL

2. REMOVE TRANSMISSION REVOLUTION SENSOR (NT)

(a) Remove the bolt and transmission revolution sensor (NT) from the automatic transaxle case sub-assembly.

3. REMOVE TRANSMISSION REVOLUTION SENSOR (NC)

(a) Remove the bolt, spacer and transmission revolution sensor (NC) from the counter drive gear sub-assembly.

*1

Spacer