Last Modified: 01-30-2024 6.11:8.1.0 Doc ID: RM100000001E3C0
Model Year Start: 2019 Model: RAV4 Prod Date Range: [11/2018 -           ]
Title: DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH: INSPECTION; 2019 - 2024 MY RAV4 RAV4 HV [11/2018 -        ]

INSPECTION

PROCEDURE

1. INSPECT POWER BACK DOOR CONTROL SWITCH

(a) Check the switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

5 (MSW) - 2 (MSE)

Pushed (ON)

Below 1 Ω

5 (MSW) - 2 (MSE)

Not Pushed (OFF)

10 kΩ or higher

If the result is not as specified, replace the power back door control switch.

*a

Component without harness connected

(Power Back Door Control Switch)

(b) Check the switch illumination.

(1) Apply auxiliary battery voltage to the switch connector and check that the power back door control switch illuminates.

OK:

Auxiliary Battery Condition

Specified Condition

Auxiliary battery positive (+) → Terminal 6 (ILL+)

Auxiliary battery negative (-) → Terminal 1 (ILL-)

Illumination illuminates

If the result is not as specified, replace the power back door control switch.