| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001YPIL |
| Model Year Start: 2022 | Model: Avalon HV | Prod Date Range: [08/2021 - ] |
| Title: A25A-FXS (ENGINE CONTROL): SFI SYSTEM: PRECAUTION; 2022 MY Avalon HV [08/2021 - ] | ||
PRECAUTION
WHEN USING TECHSTREAM
CAUTION:
Observe the following items for safety reasons:
- Before using the Techstream, read the instruction manual.
- Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One to drive the vehicle, and another to operate the Techstream.
INITIALIZATION
NOTICE:
-
Perform Registration (VIN registration) after replacing the ECM.
Click here
![2019 - 2022 MY Avalon HV [04/2018 - ]; A25A-FXS (ENGINE CONTROL): SFI SYSTEM: REGISTRATION](/t3Portal/stylegraphics/info.gif)
-
Perform Learning Value Reset and Idle Learning after replacing or servicing parts related to engine operation.
Click here
-
Perform "Grille Shutter Control Mode Switching and Grille Shutter Initialization" after replacing the swing grille actuator assembly or radiator shutter sub-assembly.
Click here
-
When the cable is disconnected from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected.
System Name
See Procedure
Lane Tracing Assist System
Intelligent Clearance Sonar System
Parking Assist Monitor System
Panoramic View Monitor System
Pre-collision System
Lighting System (for HV Model with Cornering Light)
PRECAUTIONS FOR INSPECTING HYBRID CONTROL SYSTEM
(a) Refer to Hybrid Control System.
Click here
NOTICE FOR HYBRID CONTROL SYSTEM ACTIVATION
(a) Refer to Hybrid Control System.
Click here
PRECAUTION WHEN REPLACING BATTERY ECU ASSEMBLY AND ECM
(a) Refer to Hybrid Control System.
Click here
|
|