PRE-COLLISION: PRE-COLLISION SYSTEM: U010087,U012587,U012687,U012987,U013187,U029387; Lost Communication with ECM/PCM "A" Missing Message; 2022 MY Avalon Avalon HV [08/2021

Last Modified: 08-21-2023	6.11:8.1.0	Doc ID: RM100000001YNYO
Model Year Start: 2022	Model: Avalon HV	Prod Date Range: [08/2021 - ]
Title: PRE-COLLISION: PRE-COLLISION SYSTEM: U010087,U012587,U012687,U012987,U013187,U029387; Lost Communication with ECM/PCM "A" Missing Message; 2022 MY Avalon Avalon HV [08/2021 - ]

DTC

U010087

Lost Communication with ECM/PCM "A" Missing Message

DTC

U012587

Lost Communication with Multi-axis Acceleration Sensor Module Missing Message

DTC

U012687

Lost Communication with Steering Angle Sensor Module Missing Message

DTC

U012987

Lost Communication with Brake System Control Module Missing Message

DTC

U013187

Lost Communication with Power Steering Control Module Missing Message

DTC

U029387

Lost Communication with Hybrid Powertrain Control Module Missing Message

DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
U010087	Lost Communication with ECM/PCM "A" Missing Message	While the vehicle is being driven at 5 km/h (4 mph) or more, a communication error between the ECM and the forward recognition camera is detected for approximately 6 second or more.	CAN communication system
U012587	Lost Communication with Multi-axis Acceleration Sensor Module Missing Message	While the vehicle is being driven at 5 km/h (4 mph) or more, a communication error between the airbag ECU assembly and the forward recognition camera is detected for approximately 4 seconds or more.	CAN communication system
U012687	Lost Communication with Steering Angle Sensor Module Missing Message	3 seconds after the ignition switch is turned to ON, a communication error between the steering sensor and the forward recognition camera is detected for approximately 1 second or more.	CAN communication system
U012987	Lost Communication with Brake System Control Module Missing Message	for HV Model: 3 seconds after the ignition switch is turned to ON, a communication error between the skid control ECU (brake booster with master cylinder assembly) and the forward recognition camera is detected for approximately 1 second or more. for Gasoline Model: 3 seconds after the ignition switch is turned to ON, a communication error between the skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 1 second or more.	CAN communication system
U013187	Lost Communication with Power Steering Control Module Missing Message	3 seconds after the ignition switch is turned to ON, a communication error between the power steering ECU (rack and pinion power steering gear assembly) and the forward recognition camera is detected for approximately 2 second or more.	CAN communication system
U029387	Lost Communication with Hybrid Powertrain Control Module Missing Message	While the vehicle is being driven at 5 km/h (4 mph) or more, a communication error between the hybrid vehicle control ECU and the forward recognition camera is detected for approximately 6 seconds or more.	CAN communication system

PROCEDURE

1.	CHECK FOR DTCs

(a) Clear the DTCs.

Body Electrical > Pre-Collision System > Clear DTCs

(b) Reproduce the vehicle conditions that were present when the DTCs that were noted were stored.

HINT:

If the detection conditions are not met, the system cannot detect malfunctions.

Body Electrical > Pre-Collision System > Trouble Codes

Result	Proceed to
CAN communication system DTC is not output	A
CAN communication system DTC is output	B

USE SIMULATION METHOD TO CHECK

GO TO CAN COMMUNICATION SYSTEM

for HV Model: Click here

for Gasoline Model: Click here