| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001YNW7 |
| Model Year Start: 2022 | Model: Avalon HV | Prod Date Range: [08/2021 - ] |
| Title: CRUISE CONTROL: FRONT CAMERA SYSTEM: TERMINALS OF ECU; 2022 MY Avalon Avalon HV [08/2021 - ] | ||
TERMINALS OF ECU
NOTICE:
- DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed.
- Do not apply excessive force to the forward recognition camera connector.
CHECK FORWARD RECOGNITION CAMERA
(a) Measure the voltage and resistance according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
P5-1 (HTR) - P5-10 (GND) |
B - LA |
Forward recognition with heater hood sub-assembly operation signal |
Ignition switch ON, forward recognition with heater hood sub-assembly not operating |
11 to 14 V |
|
Ignition switch ON, forward recognition with heater hood sub-assembly operating |
Below 1 V |
|||
|
P5-7 (IGB) - P5-10 (GND) |
LA-P - LA |
Power source |
Ignition switch ON |
11 to 14 V |
|
Ignition switch off |
Below 1 V |
|||
|
P5-10 (GND) - Body ground |
LA - Body ground |
Ground |
Always |
Below 1 Ω |
|
|