Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001YNTI
Model Year Start: 2022 Model: Avalon HV Prod Date Range: [08/2021 -           ]
Title: CRUISE CONTROL: FRONT CAMERA: DRIVING ADJUSTMENT; 2022 MY Avalon Avalon HV [08/2021 -        ]

DRIVING ADJUSTMENT

CAUTION / NOTICE / HINT

NOTICE:

  • Make sure to read "Before Starting Driving Adjustment" before proceeding with work.

    Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: FRONT CAMERA: BEFORE STARTING DRIVING ADJUSTMENT

  • Make sure to perform the transition to online axis alignment mode with the vehicle stopped.
  • Transitioning to online axis alignment mode will erase the learning value, so make sure to complete the adjustment.
  • Turning the engine switch off while in online axis alignment mode will cause the system to exit online axis alignment mode, so to continue with the adjustment, it is necessary to transition to online axis alignment mode again (for Gasoline Model).
  • Turning the power switch off while in online axis alignment mode will cause the system to exit online axis alignment mode, so to continue with the adjustment, it is necessary to transition to online axis alignment mode again (for HV Model).
  • All of the driving support system functions will be inoperative while the adjustment is in progress.
  • When driving the vehicle with the Techstream connected, be careful with how the wires are routed.
  • If the adjustment does not complete within a total cumulative time of 15 minutes when the vehicle is driven with all conditions met, perform the adjustment on another route.
  • If the adjustment does not complete within a total cumulative time of 30 minutes when the vehicle is driven with all conditions met, perform the adjustment using target recognition.
  • After adjustment is complete, to start the various systems it is necessary to turn the engine switch off and then to on (IG) again (for Gasoline Model).
  • After adjustment is complete, to start the various systems it is necessary to turn the power switch off and then to on (IG) again (for HV Model).
  • In situations such as when the online axis alignment terminates abnormally, to perform online axis alignment again, turn the engine switch off and then back to on (IG) and enter online axis alignment mode again (for Gasoline Model).
  • In situations such as when the online axis alignment terminates abnormally, to perform online axis alignment again, turn the power switch off and then back to on (IG) and enter online axis alignment mode again (for HV Model).
  • For vehicles with height adjustment function, perform the adjustment at the standard vehicle height.

PROCEDURE

1. PERFORM FORWARD RECOGNITION CAMERA OPTICAL AXIS LEARNING (When driving with Techstream connected to vehicle)

NOTICE:

  • Perform this procedure with the vehicle unloaded (without the emergency tire puncture repair kit or tools).
  • Only 1 person should be in the vehicle.

(a) Adjust the tire pressures to the standard values.

Click here 2021 - 2022 MY Avalon Avalon HV [08/2020 -        ]; TIRE / WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION+

(b) Clean the windshield glass.

(c) If the windshield glass in front of the forward recognition camera is fogged up, remove the forward recognition camera and forward recognition hood, clear the condensation, and then reinstall the forward recognition camera and forward recognition hood.

Forward recognition hood removal: Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: CAMERA HEATER: REMOVAL

Forward recognition hood installation: Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: CAMERA HEATER: INSTALLATION

(d) Check that RoB/DTCs other than "X2014 Front Recognition Camera Optical Axis Not Adjusted" are not output.

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: FRONT CAMERA SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

(e) Perform Transition to Online Axis Alignment Mode.

(1) With the engine switch off, connect the Techstream to the DLC3 (for Gasoline Model).

(2) Turn the engine switch on (IG) (for Gasoline Model).

(3) With the power switch off, connect the Techstream to the DLC3 (for HV Model).

(4) Turn the power switch on (IG) (for HV Model).

(5) Enter the following menus: Chassis / Front Recognition Camera / Utility / Transition to Online Axis Alignment Mode

Chassis > Front Recognition Camera > Utility

Tester Display

Transition to Online Axis Alignment Mode

(6) Confirm the conditions displayed on the screen and then press "Next".

(7) Select "Front recognition camera" and then press "Next".

(8) Check the Techstream screen and confirm that it has transitioned to online axis alignment mode.

(9) Press "Next".

(f) Online axis adjustment (Optical Axis Learning)

(1) Drive the vehicle to perform optical axis learning.

HINT:

If the alignment is performed with the Techstream connected to the vehicle, the alignment progress can be monitored through 5 stages on the Techstream screen.

(2) If the online axis alignment completes normally, the buzzer will sound 5 times.

NOTICE:

  • If the alignment terminates abnormally, the buzzer will sound for 3 seconds continuously.
  • If an error code is displayed, perform troubleshooting according to the following table, then perform the optical axis alignment again.

    Error No.

    Error Description

    Cause of Error

    Action to be Taken

    31

    Exceeded vehicle speed precondition for start of online axis alignment

    • Excessive vehicle speed at the start of online axis alignment
    • Ensure that the vehicle is stopped (vehicle speed 0 km/h) when starting online axis alignment.

    32

    Camera dirty during online axis alignment

    • During online axis alignment, dirtiness of the camera interferes with the axis adjustment.
    • Check that front of camera is not covered.
    • Check that front of camera is not dirty.
    • Check that front of camera is not fogged.
    • Check that weather is not bad (rain/fog).
    • Check that camera view is not backlit or high-glare.

    33

    Recognition invalid during online axis alignment

    • DTC/RoB is stored during online axis alignment.
    • Check whether DTC/RoB is stored.

    34

    Online axis alignment FOE out-of-range

    • FOE result from online axis alignment is offset from standard value.
    • Check camera installation condition. (Check if camera is not seated correctly)
    • Check whether tire inflation pressure is correct.

    35

    Online axis alignment FOE write error

    • FOE result from online axis alignment cannot be written to camera.
    • Inspect front camera.

(3) Press "Exit" to exit the Online axis adjustment mode.

(4) Turn the engine switch off (for Gasoline Model).

(5) Turn the engine switch on (IG) and check that the warning light turns off (for Gasoline Model).

(6) Turn the engine switch off (for Gasoline Model).

(7) Turn the power switch off (for HV Model).

(8) Turn the power switch on (IG) and check that the warning light turns off (for HV Model).

(9) Turn the power switch off (for HV Model).

(10) Disconnect the Techstream from the DLC3.

(g) Forward recognition camera optical axis learning is complete.

(h) After beam axis adjustment completes, clear the following system vehicle control history entries.

(1) Clear vehicle control history (Dynamic Radar Cruise Control System).

for Gasoline Model: Click here 2022 MY Avalon [08/2021 -        ]; CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model): VEHICLE CONTROL HISTORY

for HV Model: Click here 2022 MY Avalon HV [08/2021 -        ]; CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model): VEHICLE CONTROL HISTORY

(2) Clear vehicle control history (Front Camera System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: FRONT CAMERA SYSTEM: VEHICLE CONTROL HISTORY

(3) Clear vehicle control history (Lane Tracing Assist System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: LANE TRACING ASSIST SYSTEM: VEHICLE CONTROL HISTORY

(4) Clear vehicle control history (Road Sign Assist System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: ROAD SIGN ASSIST SYSTEM: VEHICLE CONTROL HISTORY

(5) Clear vehicle control history (Pre-collision System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: VEHICLE CONTROL HISTORY

(6) Clear vehicle control history (Lighting System).

for Gasoline Model with Cornering Light: Click here 2022 MY Avalon [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with Cornering Light): VEHICLE CONTROL HISTORY

for HV Model with Cornering Light: Click here 2022 MY Avalon HV [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for HV Model with Cornering Light): VEHICLE CONTROL HISTORY

for Gasoline Model without Cornering Light: Click here 2022 MY Avalon [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model without Cornering Light): VEHICLE CONTROL HISTORY

for HV Model without Cornering Light: Click here 2022 MY Avalon HV [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for HV Model without Cornering Light): VEHICLE CONTROL HISTORY

2. PERFORM FORWARD RECOGNITION CAMERA OPTICAL AXIS LEARNING (When driving with Techstream not connected to vehicle)

NOTICE:

  • Perform this procedure with the vehicle unloaded (without the emergency tire puncture repair kit or tools).
  • Only 1 person should be in the vehicle.

(a) Adjust the tire pressures to the standard values.

Click here 2021 - 2022 MY Avalon Avalon HV [08/2020 -        ]; TIRE / WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION+

(b) Clean the windshield glass.

(c) If the windshield glass in front of the forward recognition camera is fogged up, remove the forward recognition camera and forward recognition hood, clear the condensation, and then reinstall the forward recognition camera and forward recognition hood.

Forward recognition hood removal: Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: CAMERA HEATER: REMOVAL

Forward recognition hood installation: Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: CAMERA HEATER: INSTALLATION

(d) Check that RoB/DTCs other than "X2014 Front Recognition Camera Optical Axis Not Adjusted" are not output.

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: FRONT CAMERA SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

(e) Perform Transition to Online Axis Alignment Mode.

(1) With the engine switch off, connect the Techstream to the DLC3 (for Gasoline Model).

(2) Turn the engine switch on (IG) (for Gasoline Model).

(3) With the power switch off, connect the Techstream to the DLC3 (for HV Model).

(4) Turn the power switch on (IG) (for HV Model).

(5) Enter the following menus: Chassis / Front Recognition Camera / Utility / Transition to Online Axis Alignment Mode

Chassis > Front Recognition Camera > Utility

Tester Display

Transition to Online Axis Alignment Mode

(6) Confirm the conditions displayed on the screen and then press "Next".

(7) Select "Front recognition camera" and then press "Next".

(8) Check the Techstream screen and confirm that it has transitioned to online axis alignment mode.

(9) Press "Next".

(10) In accordance with the instructions on the screen press "Exit" and then disconnect the Techstream from the DLC3.

(f) Online axis adjustment (Optical Axis Learning)

(1) Drive the vehicle to perform optical axis learning.

(2) If the online axis alignment completes normally, the buzzer will sound 5 times.

NOTICE:

If the alignment terminates abnormally, the buzzer will sound for 3 seconds continuously.

(3) Turn the engine switch off (for Gasoline Model).

(4) Turn the engine switch on (IG) and check that the warning light turns off (for Gasoline Model).

(5) Turn the engine switch off (for Gasoline Model).

(6) Turn the power switch off (for HV Model).

(7) Turn the power switch on (IG) and check that the warning light turns off (for HV Model).

(8) Turn the power switch off (for HV Model).

(g) Forward recognition camera optical axis learning is complete.

(h) After beam axis adjustment completes, clear the following system vehicle control history entries.

(1) Clear vehicle control history (Dynamic Radar Cruise Control System).

for Gasoline Model: Click here 2022 MY Avalon [08/2021 -        ]; CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model): VEHICLE CONTROL HISTORY

for HV Model: Click here 2022 MY Avalon HV [08/2021 -        ]; CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model): VEHICLE CONTROL HISTORY

(2) Clear vehicle control history (Front Camera System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: FRONT CAMERA SYSTEM: VEHICLE CONTROL HISTORY

(3) Clear vehicle control history (Lane Tracing Assist System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: LANE TRACING ASSIST SYSTEM: VEHICLE CONTROL HISTORY

(4) Clear vehicle control history (Road Sign Assist System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; CRUISE CONTROL: ROAD SIGN ASSIST SYSTEM: VEHICLE CONTROL HISTORY

(5) Clear vehicle control history (Pre-collision System).

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: VEHICLE CONTROL HISTORY

(6) Clear vehicle control history (Lighting System).

for Gasoline Model with Cornering Light: Click here 2022 MY Avalon [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with Cornering Light): VEHICLE CONTROL HISTORY

for HV Model with Cornering Light: Click here 2022 MY Avalon HV [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for HV Model with Cornering Light): VEHICLE CONTROL HISTORY

for Gasoline Model without Cornering Light: Click here 2022 MY Avalon [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model without Cornering Light): VEHICLE CONTROL HISTORY

for HV Model without Cornering Light: Click here 2022 MY Avalon HV [08/2021 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for HV Model without Cornering Light): VEHICLE CONTROL HISTORY