Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001YNLA
Model Year Start: 2022 Model: Avalon HV Prod Date Range: [08/2021 -           ]
Title: AUDIO / VIDEO: REAR PACKAGE TRAY SPEAKER: REMOVAL; 2022 MY Avalon Avalon HV [08/2021 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear package tray speaker removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function When Necessary Procedures are not Performed

Link

*: When performing learning using the Techstream.

Click here 2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for Gasoline Model): CALIBRATION

Disconnect cable from negative battery terminal

Perform steering sensor zero point calibration

Lane Tracing Assist System

2022 MY Avalon Avalon HV [08/2021 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision System

Intelligent Clearance Sonar System*

Lighting System (for Gasoline Model with Cornering Light)

Memorize steering angle neutral point

Parking Assist Monitor System

2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM (for Gasoline Model): INITIALIZATION

Panoramic View Monitor System

2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): INITIALIZATION

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here 2021 - 2022 MY Avalon [08/2020 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for Gasoline Model): PRECAUTION

Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function When Necessary Procedures are not Performed

Link

*: When performing learning using the Techstream.

Click here 2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for HV Model): CALIBRATION

Disconnect cable from negative auxiliary battery terminal

Perform steering sensor zero point calibration

Lane Tracing Assist System

2022 MY Avalon Avalon HV [08/2021 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision System

Intelligent Clearance Sonar System*

Lighting System (for HV Model with Cornering Light)

Memorize steering angle neutral point

Parking Assist Monitor System

2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM(for HV Model): INITIALIZATION

Panoramic View Monitor System

2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): INITIALIZATION

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here 2019 - 2022 MY Avalon HV [04/2018 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): PRECAUTION

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL

2. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL+

3. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.

4. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY LH

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+

5. REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

6. REMOVE ROOF SIDE INNER GARNISH LH

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+

7. REMOVE ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.

8. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL+

9. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

10. REMOVE CENTER STOP LIGHT SET

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; LIGHTING (EXT): HIGH MOUNTED STOP LIGHT ASSEMBLY: REMOVAL

11. REMOVE REAR SEAT SHOULDER BELT COVER

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL+

12. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL+

13. REMOVE REAR NO. 3 SPEAKER ASSEMBLY

NOTICE:

Do not touch the speaker cone.

(a) Disconnect the connector.

(b) Remove the 4 bolts and disengage the guide to remove the rear No. 3 speaker assembly.

14. REMOVE SPARE WHEEL COVER ASSEMBLY (w/o Seat Heater System)

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; DOOR / HATCH: LUGGAGE COMPARTMENT DOOR SUPPORT: REMOVAL+

15. REMOVE LUGGAGE COMPARTMENT INNER TRIM PAD (w/o Seat Heater System)

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT: REAR SEAT RECLINING CONTROL CABLE: REMOVAL+

16. REMOVE ROOM PARTITION BOARD LH

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT: REAR SEAT RECLINING CONTROL CABLE: REMOVAL+

17. REMOVE ROOM PARTITION BOARD RH

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT: REAR SEAT RECLINING CONTROL CABLE: REMOVAL+

18. REMOVE NO. 1 UPPER BACK PANEL HOLE COVER

(a) Remove the No. 1 upper back panel hole cover as shown in the illustration.

Remove in this Direction

19. REMOVE SPEAKER ASSEMBLY WITH BRACKET

NOTICE:

Do not touch the speaker cone.

(a) for LH Side:

(1) Remove the 2 bolts and disengage the guide.

(2) Disconnect the connector to remove the speaker assembly with bracket.

(b) for RH Side:

(1) Disconnect the connector.

(2) Remove the 2 bolts and disengage the guide to remove the speaker assembly with bracket.