Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001YNDT |
Model Year Start: 2022 |
Model: Avalon HV |
Prod Date Range: [08/2021 -
] |
Title: HEATING / AIR CONDITIONING: BLOWER UNIT: REMOVAL; 2022 MY Avalon Avalon HV [08/2021 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during blower unit removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Disconnect cable from negative battery terminal
|
Perform steering sensor zero point calibration
|
Lane Tracing Assist System
|
|
Pre-collision System
|
Intelligent Clearance Sonar System*1
|
Lighting System (for Gasoline Model with Cornering Light)
|
Memorize steering angle neutral point
|
Parking Assist Monitor System
|
|
Panoramic View Monitor System
|
|
Steering sensor
|
Steering angle zero point learning (Initialize intelligent clearance sonar system)
|
-
Intelligent Clearance Sonar System
-
Intuitive Parking Assist System
|
|
-
Steering angle neutral point (Initialize parking assist monitor system)
-
Steering angle setting
|
Parking Assist Monitor System
|
for Initialization
for Calibration
|
Steering angle zero point learning (Initialize panoramic view monitor system)
|
Panoramic View Monitor System
|
for Initialization
for Calibration
|
Front passenger seat
|
Zero point calibration (Occupant classification system)
|
-
Occupant classification system
-
Passenger airbag ON/OFF indicator
-
Airbag system (Front passenger side)
-
Seat belt warning system (Front passenger)
|
|
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
Click here
HINT:
Before removing the blower assembly, set the air conditioning to recirculation mode.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Disconnect cable from negative auxiliary battery terminal
|
Perform steering sensor zero point calibration
|
Lane Tracing Assist System
|
|
Pre-collision System
|
Intelligent Clearance Sonar System*1
|
Lighting System (for HV Model with Cornering Light)
|
Memorize steering angle neutral point
|
Parking Assist Monitor System
|
|
Panoramic View Monitor System
|
|
Steering sensor
|
Steering angle zero point learning (Initialize intelligent clearance sonar system)
|
-
Intelligent Clearance Sonar System
-
Intuitive Parking Assist System
|
|
-
Steering angle zero point learning (Initialize parking assist monitor system)
-
Steering angle setting
|
Parking Assist Monitor System
|
for Initialization
for Calibration
|
Steering angle zero point learning (Initialize panoramic view monitor system)
|
Panoramic View Monitor System
|
for Initialization
for Calibration
|
Front passenger seat
|
Zero point calibration (Occupant classification system)
|
-
Occupant classification system
-
Passenger airbag ON/OFF indicator
-
Airbag system (Front passenger side)
-
Seat belt warning system (Front passenger)
|
|
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
Click here
HINT:
Before removing the blower assembly, set the air conditioning to recirculation mode.
PROCEDURE
1. REMOVE AIR CONDITIONER UNIT ASSEMBLY
for A25A-FXS:
Click here
for 2GR-FKS:
Click here
2. REMOVE NO. 2 AIR DUCT
Click here
3. REMOVE BLOWER ASSEMBLY
(a) Disconnect the connector.
|
|
(b) Disengage each guide.
(d) Disengage the 2 claws and 2 guides and remove the blower assembly from the air conditioning radiator assembly.
|