Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001YN8U
Model Year Start: 2022 Model: Avalon HV Prod Date Range: [08/2021 -           ]
Title: SEAT: POWER SEAT CONTROL ECU: REMOVAL; 2022 MY Avalon Avalon HV [08/2021 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during position control ECU assembly LH removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
*: When performing learning using the Techstream.

Click here 2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for Gasoline Model): CALIBRATION

Disconnect cable from negative auxiliary battery terminal

Perform steering sensor zero point calibration

Lane tracing assist system

2022 MY Avalon Avalon HV [08/2021 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision system

Intelligent clearance sonar system*

Lighting system (for Gasoline Model with Cornering Light)

Memorize steering angle neutral point

Parking assist monitor system

2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM (for Gasoline Model): INITIALIZATION

Panoramic view monitor system

2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): INITIALIZATION

  • Separate type front seat cushion spring assembly LH
  • Front seatback frame sub-assembly LH
  • Position control ECU assembly

Initialize position control ECU

Front power seat control system

2019 - 2022 MY Avalon [04/2018 -        ]; SEAT: FRONT POWER SEAT CONTROL SYSTEM (for Gasoline Model with Memory): REGISTRATION

Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
*: When performing learning using the Techstream.

Click here 2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for HV Model): CALIBRATION

Disconnect cable from negative auxiliary battery terminal

Perform steering sensor zero point calibration

Lane tracing assist system

2022 MY Avalon Avalon HV [08/2021 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision system

Intelligent clearance sonar system*

Lighting system (for HV Model with Cornering Light)

Memorize steering angle neutral point

Parking assist monitor system

2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM(for HV Model): INITIALIZATION

Panoramic view monitor system

2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): INITIALIZATION

  • Separate type front seat cushion spring assembly LH
  • Front seatback frame sub-assembly LH
  • Position control ECU assembly

Initialize position control ECU

Front power seat control system

2019 - 2022 MY Avalon HV [04/2018 -        ]; SEAT: FRONT POWER SEAT CONTROL SYSTEM (for HV Model with Memory): REGISTRATION

CAUTION:

  • Be sure to read Precaution thoroughly before servicing.

    for Gasoline Model: Click here 2021 - 2022 MY Avalon [08/2020 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for Gasoline Model): PRECAUTION

    for HV Model: Click here 2019 - 2022 MY Avalon HV [04/2018 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): PRECAUTION

  • Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

Click here 2022 MY Avalon Avalon HV [08/2021 -        ]; SEAT: FRONT SEAT ASSEMBLY: REMOVAL

2. REMOVE POSITION CONTROL ECU ASSEMBLY LH

(a) Disengage the 2 clamps.

(b) Disconnect the 3 connectors.

(c) Remove the 3 screws and position control ECU assembly LH.