HEATING / AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR (for HV Model): REMOVAL; 2022 MY Avalon HV [08/2021

Last Modified: 08-21-2023	6.11:8.1.0	Doc ID: RM100000001XRH7
Model Year Start: 2022	Model: Avalon HV	Prod Date Range: [08/2021 - ]
Title: HEATING / AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR (for HV Model): REMOVAL; 2022 MY Avalon HV [08/2021 - ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during thermistor assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link

*: Applies only for when removing and installing or replacing the television camera assembly.

Front television camera assembly, front bumper assembly or radiator grille

Television camera view adjustment
Television camera assembly optical axis adjustment (Back camera position setting)*

Panoramic View Monitor System

for Initialization

for Calibration

Front bumper assembly

Measurement of ultrasonic sensor detection angle
Ultrasonic sensor detection angle registration

Intelligent Clearance Sonar System
Intuitive Parking Assist System

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

Click here

2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH

(a) Disengage the 2 claws to remove the front radiator side air guide plate LH.

3. REMOVE THERMISTOR ASSEMBLY

(a) Disengage the clamp.

(b) Disconnect the connector to remove the thermistor assembly.