| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001RURI |
| Model Year Start: 2021 | Model: Avalon HV | Prod Date Range: [08/2020 - ] |
| Title: THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Rear Floor): INSTALLATION; 2021 - 2022 MY Avalon Avalon HV [08/2020 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
(a) Engage the clamp to install the No. 1 indoor electrical key antenna assembly.
NOTICE:
Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.
(b) Connect the connector.
2. INSTALL REAR SEAT CUSHION LOCK HOOK
Click here
![2021 - 2022 MY Avalon Avalon HV [08/2020 - ]; SEAT: REAR SEAT ASSEMBLY: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. INSTALL REAR SEAT CUSHION ASSEMBLY
Click here
4. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
Click here
5. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD (w/ Seat Heater System)
Click here
6. INSTALL SPARE WHEEL COVER ASSEMBLY (w/ Seat Heater System)
Click here
7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
for A25A-FXS: Click here
for 2GR-FKS: Click here
for A25A-FKS: Click here
8. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for HV Model)
Click here
9. PERFORM DIAGNOSTIC SYSTEM CHECK
for Gasoline Model: Click here
for HV Model: Click here
|
|