| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001RUHA |
| Model Year Start: 2021 | Model: Avalon HV | Prod Date Range: [08/2020 - ] |
| Title: INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL; 2021 - 2022 MY Avalon Avalon HV [08/2020 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE CONSOLE BOX POCKET
|
(a) Remove the console box pocket. |
|
2. REMOVE CONSOLE BOX CARPET
|
(a) Remove the console box carpet. |
|
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
(a) Disengage the 9 clips as shown in the illustration to remove the lower instrument panel finish panel LH.
|
Remove in this Direction |
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
(a) Disengage the 8 clips as shown in the illustration to remove the lower instrument panel finish panel RH.
|
|
Remove in this Direction |
5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
(a) Disengage the 6 clips as shown in the illustration.
|
|
Remove in this Direction |
|
(b) Disconnect the 4 connectors. |
|
(c) Disengage the 2 clamps to remove the front console upper panel garnish.
6. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY
(a) Disengage the 12 clips as shown in the illustration to remove the console box pocket sub-assembly.
|
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
|
(a) Remove the 4 screws. |
|
(b) Disengage the 2 clips and 2 guides as shown in the illustration to remove the center instrument cluster finish panel sub-assembly.
|
|
Remove in this Direction |
8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
for UA80E: Click here
![2019 - 2022 MY Avalon [04/2018 - ]; UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: REMOVAL+](/t3Portal/stylegraphics/info.gif)
for UB80F: Click here
for P710: Click here
9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
(a) Disengage the 7 clips as shown in the illustration.
|
|
Remove in this Direction |
|
(b) Disconnect the 2 connectors to remove the rear upper console panel sub-assembly. |
|
10. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
(a) Disengage the 2 claws, clip and guide as shown in the illustration to remove the instrument panel finish panel end LH.
|
Place Hand Here |
|
|
Remove in this Direction |
11. REMOVE CONSOLE BOX BEZEL
(a) Disengage the 6 clips as shown in the illustration.
|
|
Remove in this Direction |
|
(b) Disconnect the connector to remove the console box bezel. |
|
12. REMOVE UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY
(a) Disengage the 4 clips as shown in the illustration.
|
|
Remove in this Direction |
|
(b) Disconnect the connector and disengage the clamp to remove the upper front console panel sub-assembly. |
|
13. REMOVE CONSOLE ASSEMBLY
|
(a) Disconnect the 2 connectors. |
|
|
(b) Remove the 4 bolts and 2 screws. |
|
(c) Disengage the 2 clips as shown in the illustration to remove the console assembly.
|
|
Remove in this Direction |
|
|