| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001QO2F |  
                        | Model Year Start: 2021 | Model: Avalon | Prod Date Range: [08/2020 -                    
                                       ] |  
                        | Title: GF1A (TRANSFER / 4WD / AWD): 4WD CONTROL ECU: REMOVAL; 2021 - 2022 MY Avalon [08/2020 -        ] |  REMOVALCAUTION / NOTICE / HINTThe necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during 4WD ECU assembly removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Replaced
                     
                        
                        
                        
                        
                     
                     
                        
                           | Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |  
                           
                         
                           | Disconnect cable from negative battery terminal | Perform steering sensor zero point calibration | Lane Departure Alert System (w/ Steering Control) | 
                                 
                                    
                                       
                                          ![2019 - 2021 MY Avalon [04/2018 - 08/2021]; PRE-COLLISION: PRE-COLLISION SYSTEM (for Gasoline Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  ![2022 MY Avalon Avalon HV [08/2021 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Lane Departure Alert System (w/ Steering Control) |  
                           | Intelligent Clearance Sonar System* |  
                           | Lighting System (for Gasoline Model with Cornering Light) |  
                           | Memorize steering angle neutral point | Parking Assist Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM (for Gasoline Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Panoramic View Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.   Click here
                        
                           
                              ![2021 - 2022 MY Avalon [08/2020 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for Gasoline Model): PRECAUTION](/t3Portal/stylegraphics/info.gif)  PROCEDURE1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Click here
                        
                           
                              ![2021 MY Avalon Avalon HV [08/2020 - 08/2021]; SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Driver Side): REMOVAL](/t3Portal/stylegraphics/info.gif)  ![2022 MY Avalon Avalon HV [08/2021 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Driver Side): REMOVAL](/t3Portal/stylegraphics/info.gif)  2. REMOVE NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY Click here
                        
                           
                              ![2021 MY Avalon [08/2020 - 08/2021]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT (for Gasoline Model): REMOVAL+](/t3Portal/stylegraphics/info.gif)  ![2022 MY Avalon [08/2021 -        ]; HEATING / AIR CONDITIONING: AIR CONDITIONING UNIT (for Gasoline Model): REMOVAL+](/t3Portal/stylegraphics/info.gif)  3. REMOVE 4WD ECU ASSEMBLY   (a) Disconnect the 4WD ECU assembly connector. (b) Remove the nut and 4WD ECU assembly from the instrument panel reinforcement assembly. |