Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001QM6G
Model Year Start: 2021 Model: Avalon Prod Date Range: [08/2020 -           ]
Title: LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with Cornering Light): B2456; Left Headlight ECU Variation Error; 2021 - 2022 MY Avalon [08/2020 -        ]

DTC

B2456

Left Headlight ECU Variation Error

DESCRIPTION

This DTC is stored if the headlight ECU sub-assembly LH for another destination is installed.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

B2456

Left Headlight ECU Variation Error

Detection condition:

  • The engine switch is on (IG).

Malfunction status:

  • Vehicle specification information received via CAN communication is continuously mismatched

Malfunction duration:

  • -
  • ECM
  • Main body ECU (multiplex network body ECU)
  • Headlight ECU sub-assembly LH

HL AutoLeveling

CAUTION / NOTICE / HINT

NOTICE:

  • If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information the headlight ECU sub-assembly LH.

    Click here 2019 - 2022 MY Avalon [04/2018 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with Cornering Light): INITIALIZATION

  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

    Click here 2021 - 2022 MY Avalon [08/2020 -        ]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION

  • Before replacing the ECM, refer to Registration.

    Click here 2021 - 2022 MY Avalon [08/2020 -        ]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION

PROCEDURE

1.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

(e) Clear the DTCs.

Body Electrical > HL AutoLeveling > Clear DTCs

NEXT

2.

CHECK FOR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

(e) Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes

OK:

DTC B2456 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG

3.

CHECK ECM

(a) Check if the part number of the ECM installed to the vehicle is correct.

OK:

Part number is correct.

NG

REPLACE ECM

for 2GR-FKS: Click here 2019 - 2021 MY Avalon [04/2018 - 08/2021]; 2GR-FKS (ENGINE CONTROL): ECM: REMOVAL 2022 MY Avalon [08/2021 -        ]; 2GR-FKS (ENGINE CONTROL): ECM: REMOVAL

for A25A-FKS: Click here 2021 - 2022 MY Avalon [08/2020 -        ]; A25A-FKS (ENGINE CONTROL): ECM: REMOVAL

OK

4.

CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Check if the part number of the main body ECU (multiplex network body ECU) installed to the vehicle is correct.

OK:

Part number is correct.

OK

REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL 2022 MY Avalon Avalon HV [08/2021 -        ]; POWER DISTRIBUTION: MAIN BODY ECU: REMOVAL