| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001Q5B7 |
| Model Year Start: 2021 | Model: Avalon | Prod Date Range: [08/2020 - ] |
| Title: MAINTENANCE: A25A-FKS DRIVE BELT: INSTALLATION; 2021 - 2022 MY Avalon [08/2020 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL V-RIBBED BELT
HINT:
When reusing the V-ribbed belt, check the ribs and back of the V-ribbed belt for wear and cracks. If wear or a crack that reaches the core (at more than 1 point) is found, replace the V-ribbed belt.
|
(a) Set the V-ribbed belt onto each pulley as shown in the illustration. |
|
(b) Turn the V-ribbed belt tensioner assembly clockwise and remove the 5 mm hexagon wrench.
|
(c) After installing the V-ribbed belt, check that it fits properly in the ribbed grooves. Confirm that the V-ribbed belt has not slipped out of the grooves on the bottom of the pulley by hand. |
|
2. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
Click here
![2021 - 2022 MY Avalon [08/2020 - ]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. INSTALL NO. 1 ENGINE UNDER COVER
Click here
4. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
Click here
5. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
Click here
|
|