- Poor idle, etc.
- Engine start function, etc.
| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001PX4C |
| Model Year Start: 2021 | Model: Avalon | Prod Date Range: [08/2020 - ] |
| Title: A25A-FKS (ENGINE CONTROL): ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL; 2021 - 2022 MY Avalon [08/2020 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during engine coolant temperature sensor removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
|
Replacement of engine coolant temperature sensor |
Inspection after repair |
|
|
PROCEDURE
1. DRAIN ENGINE COOLANT
Click here
![2021 - 2022 MY Avalon [08/2020 - ]; MAINTENANCE: A25A-FKS COOLANT: REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
|
(a) Disconnect the engine coolant temperature sensor connector. |
|
|
(b) Remove the clip and engine coolant temperature sensor from the water outlet. NOTICE: If the engine coolant temperature sensor has been struck or dropped, replace it. |
|
|
|