Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001PX33
Model Year Start: 2021 Model: Avalon Prod Date Range: [08/2020 -           ]
Title: A25A-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID: REMOVAL; 2021 - 2022 MY Avalon [08/2020 -        ]

REMOVAL

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION

PROCEDURE

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Click here 2021 - 2022 MY Avalon [08/2020 -        ]; A25A-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

2. REMOVE NO. 1 BRAKE TUBE CLAMP BRACKET

(a) Disengage the 3 clamps and remove the piping clamp.

NOTICE:

When removing and installing the piping clamp, be careful not to deform the suction pipe sub-assembly or air conditioning tube and accessory assembly.

(b) Remove the bolt to separate the No. 1 brake tube clamp bracket from the vehicle body.

(c) Disengage the clamp and remove the No. 1 brake tube clamp bracket.

3. REMOVE NO. 2 ENGINE COVER

Click here 2021 - 2022 MY Avalon [08/2020 -        ]; A25A-FKS (ENGINE MECHANICAL): ENGINE UNIT: REMOVAL+

4. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

(a) Disconnect the cam timing oil control solenoid assembly connector.

(b) Using an 8 mm socket wrench, remove the 2 bolts and cam timing oil control solenoid assembly from the No. 2 timing gear cover assembly.

NOTICE:

If the cam timing oil control solenoid assembly has been struck or dropped, replace it.

5. REMOVE O-RING

HINT:

Perform this procedure only when replacement of the O-ring is necessary.

(a) Remove the O-ring from the cam timing oil control solenoid assembly.

NOTICE:

  • When removing the O-ring, be careful not to damage the O-ring groove of the cam timing oil control solenoid assembly.
  • If the O-ring groove of the cam timing oil control solenoid assembly is damaged, replace the cam timing oil control solenoid assembly with a new one.