| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001PTJ1 |
| Model Year Start: 2021 | Model: Avalon | Prod Date Range: [08/2020 - ] |
| Title: BRAKE SYSTEM (OTHER): VACUUM PUMP (for A25A-FKS): REMOVAL; 2021 - 2022 MY Avalon [08/2020 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![2019 - 2022 MY Avalon Avalon HV [04/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. DISCONNECT NO. 1 VACUUM HOSE CONNECTOR
(a) Pinch the retainer of the No. 1 vacuum hose connector, and then pull the No. 1 vacuum hose connector off of the vacuum pump assembly.
NOTICE:
Be sure to disconnect the No. 1 vacuum hose connector by hand.
|
*a |
Retainer |
|
Pinch |
|
Pull off |
2. SEPARATE ENGINE WIRE
|
(a) Disengage the 2 clamps to separate the engine wire. |
|
3. REMOVE VACUUM PUMP ASSEMBLY
|
(a) Using an 8 mm socket wrench, remove the 3 bolts and vacuum pump assembly from the engine assembly. |
|
|
(b) Remove the No. 1 vacuum pump O-ring from the vacuum pump assembly. |
|
|
|