Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001PTI9
Model Year Start: 2021 Model: Avalon Prod Date Range: [08/2020 -           ]
Title: A25A-FKS (STARTING): STARTER: INSTALLATION; 2021 - 2022 MY Avalon [08/2020 -        ]

INSTALLATION

PROCEDURE

1. INSTALL STARTER ASSEMBLY

(a) Install the starter assembly to the cylinder block sub-assembly with the 2 bolts.

Torque:

46 N·m {469 kgf·cm, 34 ft·lbf}

(b) Connect the No. 2 engine wire to terminal 30 with the nut.

Torque:

9.8 N·m {100 kgf·cm, 87 in·lbf}

(c) Close the terminal cap.

(d) Connect the starter assembly connector.

2. INSTALL FLYWHEEL HOUSING SIDE COVER

(a) Align the protrusion with the cylinder block sub-assembly and engage the claw as shown in the illustration to install the flywheel housing side cover.

NOTICE:

  • Make sure the claw makes a click sound, indicating that it fits tightly.
  • Replace the flywheel housing side cover with a new one if the claw does not fit tightly or is deformed.

3. INSTALL FRONT ENGINE MOUNTING INSULATOR

Click here 2021 - 2022 MY Avalon [08/2020 -        ]; A25A-FKS (ENGINE CONTROL): ACTIVE CONTROL ENGINE MOUNT: INSTALLATION

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click here 2021 - 2022 MY Avalon [08/2020 -        ]; MAINTENANCE: A25A-FKS BATTERY: INSTALLATION+