| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001JLDZ |
| Model Year Start: 2020 | Model: Avalon HV | Prod Date Range: [08/2019 - ] |
| Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: DISASSEMBLY; 2020 - 2022 MY Avalon Avalon HV [08/2019 - ] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
Click here
![2019 - 2022 MY Avalon Avalon HV [04/2018 - ]; PARK ASSIST / MONITORING: TELEVISION CAMERA (for Front): REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
HINT:
Use the same procedure for the RH side and LH side.
Click here
3. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)
HINT:
Use the same procedure for the RH side and LH side.
Click here
4. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)
(a) Disengage the 11 clamps to remove the No. 4 engine room wire.
5. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Bar Type Radiator Grille)
|
(a) Remove the 4 screws. |
|
(b) Remove the front license plate bracket sub-assembly as shown in the illustration.
|
Remove in this Direction |
6. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Mesh Type Radiator Grille)
|
(a) Remove the 4 screws. |
|
(b) Remove the front license plate bracket sub-assembly as shown in the illustration.
|
|
Remove in this Direction |
7. REMOVE AIR INTAKE DUCT LH
(a) Remove the 2 screws and clip.
|
Screw |
|
Clip |
(b) Disengage the 4 guides to remove the air intake duct LH as shown in the illustration.
|
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
8. REMOVE AIR INTAKE DUCT RH
HINT:
Use the same procedure as for the LH side.
9. REMOVE FRONT SPOILER LH (for TRD)
|
(a) Remove the 3 screws. |
|
(b) Separate the double-sided tape and remove the front spoiler LH.
|
Double-sided Tape |
10. REMOVE FRONT SPOILER RH (for TRD)
HINT:
Use the same procedure as for the LH side.
11. REMOVE FRONT SPOILER SIDE RETAINER LH (for TRD)
|
(a) Remove the 2 screws and front spoiler side retainer LH. |
|
12. REMOVE FRONT SPOILER SIDE RETAINER RH (for TRD)
HINT:
Use the same procedure as for the LH side.
13. REMOVE FRONT SPOILER SUB-ASSEMBLY LH (for TRD)
|
(a) Remove the 4 screws. |
|
(b) Separate the double-sided tape and remove the front spoiler sub-assembly LH.
|
|
Double-sided Tape |
14. REMOVE FRONT SPOILER SUB-ASSEMBLY RH (for TRD)
HINT:
Use the same procedure as for the LH side.
15. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
Click here
16. REMOVE HOOD TO FRONT END PANEL SEAL
(a) Disengage the 4 clips.
|
|
Double-sided Tape |
(b) Separate the double-sided tape and remove the hood to front end panel seal.
17. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 claws to remove the radiator grille emblem assembly.
18. REMOVE RADIATOR GRILLE SUB-ASSEMBLY
(a) Remove the 3 screws and 2 clips.
|
|
Screw |
|
|
Clip |
|
(b) Remove the 8 screws. |
|
|
(c) Disengage the 4 claws and guide to remove the radiator grille sub-assembly. |
|
19. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Bar Type Radiator Grille)
|
(a) Remove the 8 screws. |
|
(b) Disengage the 23 claws and 5 guides to remove the lower radiator grille sub-assembly.
20. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Mesh Type Radiator Grille)
|
(a) Remove the 8 screws. |
|
(b) Disengage the 23 claws and 3 guides to remove the lower radiator grille sub-assembly.
21. REMOVE RADIATOR GRILLE (for Bar Type Radiator Grille)
|
(a) Remove the screw. |
|
|
(b) Disengage the 6 claws and 6 guides to remove the radiator grille. |
|
22. REMOVE FRONT BUMPER MOULDING (for Bar Type Radiator Grille)
|
(a) Remove the 6 screws. |
|
(b) Disengage the 18 claws and 20 guides to remove the front bumper moulding.
23. REMOVE FRONT BUMPER GUARD GARNISH SUB-ASSEMBLY (for TRD)
(a) Remove the front bumper guard garnish sub-assembly.
24. REMOVE FRONT BUMPER SIDE RETAINER LH
(a) Remove the bolt (A) and bolt (B).
|
|
Bolt (A) |
|
|
Bolt (B) |
(b) Disengage the clip as shown in the illustration.
|
|
Remove in this Direction (1) |
|
|
Remove in this Direction (2) |
(c) Disengage the claw to remove the front bumper side retainer LH as shown in the illustration.
25. REMOVE FRONT BUMPER SIDE RETAINER RH
HINT:
Use the same procedure as for the LH side.
26. REMOVE NO. 2 FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 4 guides to remove the No. 2 front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
27. REMOVE FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 2 guides to remove the front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
28. REMOVE FRONT BUMPER REINFORCEMENT
(a) Remove the headlight assembly LH.
Click here
(b) Remove the headlight assembly RH.
HINT:
Use the same procedure as for the LH side.
|
(c) Disengage the 4 clamps. |
|
(d) Remove the 8 bolts and front bumper reinforcement as shown in the illustration.
|
|
Remove in this Direction |
|
|