| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001C2NI |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - ] |
| Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM(for HV Model): Black Screen; 2019 - 2022 MY Avalon HV [04/2018 - ] | ||
|
Black Screen |
DESCRIPTION
The video signal from the television camera assembly is transmitted to the radio and display receiver assembly.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.
Click here
![2019 - 2022 MY Avalon HV [04/2018 - ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM(for HV Model): CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - TELEVISION CAMERA ASSEMBLY) |
Click here
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
2. |
INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY |
Click here
| NG |
|
|
|
3. |
INSPECT RADIO AND DISPLAY RECEIVER ASSEMBLY (V+, GND1) |
Click here
| NG |
|
|
|
4. |
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY |
(a) Replace the radio and display receiver assembly with a new or known good one.
Click here
(b) Check that the parking assist monitor system operates normally.
OK:
Parking assist monitor system operates normally.
| OK |
|
END |
| NG |
|
|
|