|
Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001C2E5 |
|
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
|
Title: PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for HV Model): C1AFA; Blind Spot Monitor Beam Axis Misalignment; 2019 - 2022 MY Avalon HV [04/2018 - ] |
|
DTC
|
C1AFA
|
Blind Spot Monitor Beam Axis Misalignment
|
DESCRIPTION
This DTC is stored when the clearance warning ECU assembly receives a signal from the blind spot monitor system via CAN communication indicating blind spot monitor beam axis misalignment.
|
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
|
C1AFA
|
Blind Spot Monitor Beam Axis Misalignment
|
The clearance warning ECU assembly receives a signal from blind spot monitor system indicating blind spot monitor beam axis misalignment.
|
Blind spot monitor system
|
PROCEDURE
(a) Using the Techstream, check for DTCs according to the prompts on the screen.
HINT:
After turning the power switch from off to on (IG), wait 4 seconds or more before checking for DTCs.
Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
(b) Clear the DTCs according to the screen on the Techstream.
Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Clear DTCs
(c) Recheck for DTCs.
Body Electrical > Advanced Parking Guidance/ICS/Intuitive P/A > Trouble Codes
HINT:
-
DTC C1AFA is stored when a malfunction signal sent from the blind spot monitor system is detected.
-
If the malfunctioning part has been repaired or replaced before rechecking for DTCs, DTC C1AFA will not be output again.
-
If DTC C1AFA is output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even though the DTC was not output when rechecking for DTCs.
Click here
|
Result
|
Proceed to
|
|
DTC C1AFA is output
|
A
|
|
DTC C1AFA is not output
|
B
|
|