Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001BTC7
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 -           ]
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HV Model): Cellular Phone Registration Failure; 2019 - 2022 MY Avalon HV [04/2018 -        ]

Cellular Phone Registration Failure

CAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

    Click here 2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HV Model): PRECAUTION 2022 MY Avalon HV [08/2021 -        ]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HV Model): PRECAUTION

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

1.

CHECK USAGE CONDITION

(a) Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.

  • The cellular phone is "Bluetooth" compatible.

    Click here 2019 - 2020 MY Avalon HV [04/2018 - 08/2020]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HV Model): SYSTEM DESCRIPTION 2021 - 2022 MY Avalon HV [08/2020 -        ]; NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HV Model): SYSTEM DESCRIPTION

  • "Bluetooth" setting of the cellular phone is on.
  • Operating system and software of the cellular phone are the latest versions.
  • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
  • The "Wi-Fi" setting of the cellular phone is off.
  • The "Wi-Fi" tethering setting of the cellular phone is off.

(b) Register the cellular phone again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

Result

Proceed to

Cellular phone can be registered.

A

Cellular phone cannot be registered.

B
A

END
B

2.

RESTART CELLULAR PHONE

(a) Restart the cellular phone.

(b) Turn the power switch off.

(c) Turn the power switch on (ACC).

(d) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

Result

Proceed to

Cellular phone can be registered.

A

Cellular phone cannot be registered.

B
A

END
B

3.

BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE

(a) Place the cellular phone close to the radio and display receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

Result

Proceed to

Cellular phone can be registered.

A

Cellular phone cannot be registered.

B
A

END
B

4.

CLEAR REGISTERED DEVICE INFORMATION

(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio and display receiver assembly.

(b) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

Result

Proceed to

Cellular phone can be registered.

A

Cellular phone cannot be registered.

B
A

END
B

5.

RESTART CELLULAR PHONE

(a) Restart the cellular phone.

(b) Turn the power switch off.

(c) Turn the power switch on (ACC).

(d) Register the cellular phone as a connected device again and check if it is registered correctly.

HINT:

If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

Result

Proceed to

Cellular phone can be registered.

A

Cellular phone cannot be registered.

B
A

END
B

6.

CHECK USING ANOTHER VEHICLE

(a) Check if the cellular phone can be registered normally to another "Bluetooth" compatible vehicle of the same model.

HINT:

  • Make sure to obtain the customer's permission to perform this procedure.
  • After the inspection, clear the registered information and usage history acquired during the inspection.
  • If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

Result

Proceed to

Cellular phone can be registered.

A

Cellular phone cannot be registered.

B
A

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

B

7.

CHECK USING ANOTHER CELLULAR PHONE

(a) Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.

HINT:

  • Make sure to obtain the customer's permission to perform this procedure.
  • After the inspection, clear the registered information and usage history acquired during the inspection.
  • If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

Result

Proceed to

Cellular phone can be registered.

A

Cellular phone cannot be registered.

B
A

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)
B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY