|
Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001BQWA |
|
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 - 08/2020] |
|
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for HV Model): Data Signal Circuit between Radio Receiver and Stereo Jack Adapter; 2019 - 2020 MY Avalon HV [04/2018 - 08/2020] |
|
Data Signal Circuit between Radio Receiver and Stereo Jack Adapter
|
DESCRIPTION
The stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio and display receiver assembly via this circuit.
WIRING DIAGRAM
PROCEDURE
|
1.
|
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - STEREO JACK ADAPTER ASSEMBLY)
|
(a) Disconnect the G106 radio and display receiver assembly connector.
(b) Disconnect the G5 stereo jack adapter assembly connector.
|
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection
|
Condition
|
Specified Condition
|
|
G106-2 (US1-) - G5-9 (UDO-)
|
Always
|
Below 1 Ω
|
|
G106-3 (US1+) - G5-10 (UDO+)
|
Always
|
Below 1 Ω
|
|
G106-5 (USG1) - G5-12 (UJSS)
|
Always
|
Below 1 Ω
|
|
G106-2 (US1-) or G5-9 (UDO-) - Body ground
|
Always
|
10 kΩ or higher
|
|
G106-3 (US1+) or G5-10 (UDO+) - Body ground
|
Always
|
10 kΩ or higher
|
|
G106-5 (USG1) or G5-12 (UJSS) - Body ground
|
Always
|
10 kΩ or higher
|
|
|
|
*a
|
Front view of wire harness connector
(to Radio and Display Receiver Assembly)
|
|
*b
|
Front view of wire harness connector
(to Stereo Jack Adapter Assembly)
|
|
|
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|