Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001BQW6 |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for HV Model): Parking Brake Switch Circuit; 2019 - 2022 MY Avalon HV [04/2018 - ] |
Parking Brake Switch Circuit
|
DESCRIPTION
This circuit is from the parking brake ECU (brake actuator assembly) to the radio and display receiver assembly.
WIRING DIAGRAM
PROCEDURE
1.
|
CHECK BRAKE WARNING LIGHT
|
(a) Check that the brake warning light comes on when the parking brake is applied and goes off when it is released.
OK:
The brake warning light operates as specified above.
OK
|
|
|
2.
|
CHECK HARNESS AND CONNECTOR (PARKING BRAKE ECU (BRAKE ACTUATOR ASSEMBLY) - RADIO AND DISPLAY RECEIVER ASSEMBLY)
|
(a) Disconnect the G2 radio and display receiver assembly connector.
(b) Disconnect the A39 parking brake ECU (brake actuator assembly) connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
G2-20 (PKB) - A39-19 (PKB)
|
Always
|
Below 1 Ω
|
G2-20 (PKB) or A39-19 (PKB) - Body ground
|
Always
|
10 kΩ or higher
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|