Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001BGR1 |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 - 08/2021] |
Title: A25A-FXS (COOLING): THERMOSTAT: REMOVAL; 2019 - 2021 MY Avalon HV [04/2018 - 08/2021] |
REMOVAL
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
PROCEDURE
1. DRAIN ENGINE COOLANT (for Engine)
Click here
2. DISCONNECT NO. 2 RADIATOR HOSE
Click here
3. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
(a) Disconnect the water inlet with thermostat sub-assembly connector.
|
|
(b) Slide the clip and disconnect the No. 7 water by-pass hose from the water inlet with thermostat sub-assembly.
NOTICE:
-
Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 7 water by-pass hose.
-
Do not damage the water inlet with thermostat sub-assembly.
HINT:
When disconnecting the No. 7 water by-pass hose, slide the clip, rotate the hose and pull it straight off the pipe.
|
|
(c) Using an 8 mm socket wrench, remove the 2 bolts and water inlet with thermostat sub-assembly.
|
|
(d) Remove the gasket from the water inlet with thermostat sub-assembly.
|
|
|