| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001BE5K |  
                        | Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - 08/2021] |  
                        | Title: PRE-COLLISION: PRE-COLLISION SYSTEM (for HV Model): C1A4B; Stop Light Relay Circuit; 2019 - 2021 MY Avalon HV [04/2018 - 08/2021] |  
                     
                        
                           | DTC | C1A4B | Stop Light Relay Circuit |  DESCRIPTIONThe skid control ECU (brake booster with master cylinder assembly) sends a stop light operation request signal to the stop light relay (stop light switch assembly). If the skid control ECU (brake booster with master cylinder assembly) detects a malfunction in the stop light relay (stop light switch assembly) circuit, the driving support ECU assembly stores DTC C1A4B. 
                     
                        
                        
                        
                        
                     
                     
                        
                           | DTC No. | Detection Item | DTC Detection Condition | Trouble Area |  
                           | C1A4B | Stop Light Relay Circuit | Both of the following conditions are met: 
                                 
                                    
All of the following conditions are met:
                                          
                                             
3 seconds have elapsed since the power switch was turned to on (IG).
The battery voltage is 10 V or more for 3 seconds or more.
All of the following conditions are met for 1 second or more:
                                          
                                             
Communication between the driving support ECU assembly and skid control ECU (brake booster with master cylinder assembly) is normal.
The driving support ECU assembly receives a stop light relay circuit malfunction signal from the skid control ECU (brake booster with master cylinder assembly)
 | Electronically controlled brake system |  CAUTION / NOTICE / HINTNOTICE: The pre-collision system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting. Click here
                        
                           
                              ![2019 - 2022 MY Avalon HV [04/2018 -        ]; NETWORKING: CAN COMMUNICATION SYSTEM (for HV Model): HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)  PROCEDURE
                     
                        
                           | 1.  | GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM |  HINT: If DTC C1A4B is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system. Click here
                        
                           
                              ![2019 - 2022 MY Avalon HV [04/2018 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model): HOW TO PROCEED WITH TROUBLESHOOTING](/t3Portal/stylegraphics/info.gif)  
                     
                        
                           | NEXT |   | END |  |