Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001B6AU
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 - 08/2019]
Title: A25A-FXS (LUBRICATION): OIL PRESSURE SENSOR: REMOVAL; 2019 MY Avalon HV [04/2018 - 08/2019]

REMOVAL

PROCEDURE

1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Click here 2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; A25A-FXS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Click here 2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; A25A-FXS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

3. REMOVE NO. 1 ENGINE UNDER COVER

Click here 2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; A25A-FXS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Click here 2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; A25A-FXS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

5. REMOVE OIL PRESSURE SENSOR (OIL PRESSURE SENDER GAUGE ASSEMBLY)

(a) Disconnect the oil pressure sensor (oil pressure sender gauge assembly) connector.

(b) Using a 27 mm deep socket wrench, remove the oil pressure sensor (oil pressure sender gauge assembly) from the cylinder block sub-assembly.