2GR-FKS (LUBRICATION): OIL PRESSURE SWITCH: INSTALLATION; 2019 - 2022 MY Avalon [04/2018

Last Modified: 08-21-2023	6.11:8.1.0	Doc ID: RM100000001B65N
Model Year Start: 2019	Model: Avalon	Prod Date Range: [04/2018 - ]
Title: 2GR-FKS (LUBRICATION): OIL PRESSURE SWITCH: INSTALLATION; 2019 - 2022 MY Avalon [04/2018 - ]

INSTALLATION

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

(a) Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

NOTICE:

Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.
Install the engine oil pressure switch assembly within 3 minutes of applying adhesive.

*a	Adhesive
*b	Oil Inlet Port

(b) Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque:

15 N·m {153 kgf·cm, 11 ft·lbf}

NOTICE:

Do not start the engine for at least 1 hour after installation.

(d) Engage the clamp to connect the wire harness protector.

2. ADD ENGINE OIL

Click here

3. CHECK ENGINE OIL LEVEL

Click here

4. INSPECT FOR OIL LEAK

Click here

5. INSTALL FRONT FENDER APRON SEAL RH

Click here