| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B4T9 |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - 08/2020] |
| Title: CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION; 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020] | ||
INSTALLATION
PROCEDURE
1. INSTALL DCM (TELEMATICS TRANSCEIVER)
2. INSTALL NAVIGATION ECU WITH ANTENNA CORD (w/ Navigation System)
3. INSTALL NO. 1 TELEPHONE BRACKET
(a) w/o Navigation System:
(1) Engage the 2 guides and install the No. 1 telephone bracket with the screw.
(b) w/ Navigation System:
(1) Engage the 3 guides and install the No. 1 telephone bracket with the 3 screws.
4. INSTALL NO. 2 TELEPHONE BRACKET
(a) w/o Navigation System:
(1) Engage the 2 guides and install the No. 2 telephone bracket with the screw.
(2) Engage the wiring harness clamp.
(b) w/ Navigation System:
(1) Engage the 3 guides and install the No. 2 telephone bracket with the 3 screws.
(2) Engage the wiring harness clamp.
(3) Engage the clamp.
5. INSTALL TELEPHONE AND GPS ANTENNA CORD
Click here
![2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; CELLULAR COMMUNICATION: TELEPHONE AND GPS ANTENNA CORDS: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
6. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
(a) w/o Navigation System:
(1) Connect each connector.
(2) Install the DCM (telematics transceiver) with bracket with the 2 nuts as shown in the illustration.
|
Install in this Direction |
(3) Connect the connector.
(b) w/ Navigation System:
(1) Connect each connector.
(2) Install the DCM (telematics transceiver) with bracket with the 2 nuts as shown in the illustration.
|
|
Install in this Direction |
(3) Connect the 2 connectors.
7. INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY
Click here
8. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
Click here
9. INSTALL CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL
Click here
10. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL
Click here
11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
12. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY
Click here
13. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
Click here
14. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here
15. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here
16. PERFORM DCM ACTIVATION
HINT:
After replacing the DCM (telematics transceiver), make sure to perform DCM activation.
for Gasoline Model: Click here
for HV Model: Click here
17. PERFORM REGISTRATION
for Toyota Entune Remote Connect Compatible Type:
HINT:
After replacing the DCM (telematics transceiver), make sure to perform code registration (Smart key System (for Start Function)).
for Gasoline Model: Click here
for HV Model: Click here
|
|