Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001B4AJ
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 -           ]
Title: A25A-FXS (ENGINE CONTROL): SFI SYSTEM: REGISTRATION; 2019 - 2022 MY Avalon HV [04/2018 -        ]

REGISTRATION

CAUTION / NOTICE / HINT

PROCEDURE

1. VIN (VEHICLE IDENTIFICATION NUMBER)

NOTICE:

The Vehicle Identification Number (VIN) must be written to a replacement ECM.

HINT:

The VIN is a 17-digit alphanumeric vehicle identification number. The Techstream is required to register the VIN.

(a) DESCRIPTION

HINT:

This registration section consists of 2 parts: Read VIN and Write VIN.

(1) Read VIN: This procedure allows the VIN stored in the ECM to be read in order to confirm that the 2 VINs, provided with the vehicle and stored in the vehicle ECM, are the same.

(2) Write VIN: This procedure allows the VIN to be written into the ECM. If the ECM is replaced, or the ECM VIN and vehicle VIN do not match, the VIN can be registered, or overwritten in the ECM by following this procedure.

(b) READ VIN

(1) Confirm the vehicle VIN.

(2) Connect the Techstream to the DLC3.

(3) Turn the power switch on (IG).

(4) Turn the Techstream on.

(5) Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Read.

Powertrain > Engine > Utility

Tester Display

VIN

(6) According to the display on the Techstream, read the VIN stored in the ECM.

(c) WRITE VIN

(1) Confirm the vehicle VIN.

(2) Connect the Techstream to the DLC3.

(3) Turn the power switch on (IG).

(4) Turn the Techstream on.

(5) Enter the following menus: Powertrain / Engine / Utility / VIN / VIN Write.

Powertrain > Engine > Utility

Tester Display

VIN

(6) According to the display on the Techstream, write the VIN to the ECM.