|
Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001B3SY |
|
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
|
Title: HYBRID / BATTERY CONTROL: COMBINATION SWITCH: INSPECTION; 2019 - 2022 MY Avalon HV [04/2018 - ] |
INSPECTION
PROCEDURE
1. INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY
(a) Inspect EV mode switch (electric parking brake switch assembly)
|
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection
|
Condition
|
Specified Condition
|
|
G24-14 (S) - G24-16 (GND1)
|
EV mode switch (electric parking brake switch assembly) being pushed and held
|
Below 1 Ω
|
|
EV mode switch (electric parking brake switch assembly) not pushed
|
10 kΩ or higher
|
If the result is not as specified, replace the EV mode switch (electric parking brake switch assembly).
|
|
|
*a
|
Component without harness connected
(EV Mode Switch (Electric Parking Brake Switch Assembly))
|
|
|
(b) Inspect NORMAL mode switch (electric parking brake switch assembly)
|
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection
|
Condition
|
Specified Condition
|
|
G24-13 (B) - G24-16 (GND1)
|
NORMAL mode switch (electric parking brake switch assembly) being pushed and held
|
Below 1 Ω
|
|
NORMAL mode switch (electric parking brake switch assembly) not pushed
|
10 kΩ or higher
|
If the result is not as specified, replace the NORMAL mode switch (electric parking brake switch assembly).
|
|
|
*a
|
Component without harness connected
(NORMAL Mode Switch (Electric Parking Brake Switch Assembly))
|
|
|
(c) Inspect SPORT mode switch (electric parking brake switch assembly)
|
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection
|
Condition
|
Specified Condition
|
|
G24-12 (P) - G24-16 (GND1)
|
SPORT mode switch (electric parking brake switch assembly) being pushed and held
|
Below 1 Ω
|
|
SPORT mode switch (electric parking brake switch assembly) not pushed
|
10 kΩ or higher
|
If the result is not as specified, replace the SPORT mode switch (electric parking brake switch assembly).
|
|
|
*a
|
Component without harness connected
(SPORT Mode Switch (Electric Parking Brake Switch Assembly))
|
|
|
|