Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001B1ZB |
Model Year Start: 2019 |
Model: Avalon |
Prod Date Range: [04/2018 -
] |
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): HOW TO PROCEED WITH TROUBLESHOOTING; 2019 - 2022 MY Avalon [04/2018 - ] |
HOW TO PROCEED WITH TROUBLESHOOTING
|
CAUTION / NOTICE / HINT
HINT:
-
Use the following procedure to troubleshoot the panoramic view monitor system.
-
*: Use the Techstream.
PROCEDURE
1.
|
VEHICLE BROUGHT TO WORKSHOP
|
NEXT
|
|
|
2.
|
INSPECT BATTERY VOLTAGE
|
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, replace or recharge the battery before proceeding.
NEXT
|
|
|
3.
|
CHECK NAVIGATION SYSTEM
|
(a) Refer to Navigation System.
Click here
OK:
Navigation system is normal.
OK
|
|
|
4.
|
CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
|
(a) Use the Techstream to check if the CAN communication system is functioning normally.
Click here
Result
|
Proceed to
|
CAN DTCs are not output
|
A
|
CAN DTCs are output
|
B
|
A
|
|
|
(a) Check for DTCs and note any codes that are output.
Chassis > Panoramic View Monitor > Trouble Codes
(b) Clear the DTCs.
Chassis > Panoramic View Monitor > Clear DTCs
(c) Recheck for DTCs. Try to reproduce the DTCs by simulating the original activity that the DTC suggests.
Chassis > Panoramic View Monitor > Trouble Codes
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
A
|
|
|
6.
|
PROBLEM SYMPTOMS TABLE
|
(a) Refer to the Problem Symptoms Table.
Click here
Result
|
Proceed to
|
Fault is not listed in Problem Symptoms Table
|
A
|
Fault is listed in Problem Symptoms Table
|
B
|
A
|
|
|
7.
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
|
(a) Data List / Active Test
Click here
(b) Terminals of ECU
Click here
NEXT
|
|
|
8.
|
ADJUST, REPAIR OR REPLACE
|
NEXT
|
|
|
NEXT |
|
END
|
|