- Parking assist monitor system initialization
- Television camera assembly optical axis adjustment (Back camera position setting)
| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B1Z3 |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - ] |
| Title: PARK ASSIST / MONITORING: TELEVISION CAMERA(for Rear): REMOVAL; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during television camera assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Television camera assembly (w/ Parking Assist Monitor System) |
|
Parking Assist Monitor System |
|
|
Television camera assembly (w/ Panoramic View Monitor System) |
|
Panoramic View Monitor System |
|
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function When Necessary Procedures are not Performed |
Link |
|---|---|---|---|
|
Television camera assembly (w/ Parking Assist Monitor System) |
|
Parking Assist Monitor System |
|
|
Television camera assembly (w/ Panoramic View Monitor System) |
|
Panoramic View Monitor System |
|
PROCEDURE
1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
Click here
![2019 - 2022 MY Avalon Avalon HV [04/2018 - ]; EXTERIOR PANELS / TRIM: LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE TELEVISION CAMERA ASSEMBLY
(a) Disengage the 4 claws to remove the 2 grommets as shown in the illustration.
|
Remove in this Direction |
|
(b) Disconnect the connector to remove the television camera assembly. |
|
|
|