| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B1YJ |  
                        | Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - 08/2021] |  
                        | Title: PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: REMOVAL; 2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021] |  REMOVALCAUTION / NOTICE / HINTThe necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during clearance warning ECU assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
                     
                        
                        
                        
                        
                     
                     
                        
                           | Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |  
                           
                         
                           | Disconnect cable from negative battery terminal | Perform steering sensor zero point calibration | Lane Departure Alert System (w/ Steering Control) | 
                                 
                                    
                                       
                                          ![2019 - 2021 MY Avalon [04/2018 - 08/2021]; PRE-COLLISION: PRE-COLLISION SYSTEM (for Gasoline Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Pre-collision System |  
                           | Intelligent Clearance Sonar System* |  
                           | Lighting System (for Gasoline Model with Cornering Light) |  
                           | Memorize steering angle neutral point | Parking Assist Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM (for Gasoline Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Panoramic View Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Replacement of clearance warning ECU assembly | 
                                 
                                    
Measure ultrasonic sensor detection angle
Steering angle zero point learning
Register bumper type
Register ultrasonic sensor detection angle
 | 
                                 
                                    
Intelligent Clearance Sonar System
Intuitive Parking Assist System
 | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for Gasoline Model): CALIBRATION](/t3Portal/stylegraphics/info.gif)  |  CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Click here
                        
                           
                              ![2019 - 2020 MY Avalon [04/2018 - 08/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for Gasoline Model): PRECAUTION](/t3Portal/stylegraphics/info.gif)  ![2021 - 2022 MY Avalon [08/2020 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for Gasoline Model): PRECAUTION](/t3Portal/stylegraphics/info.gif)    Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
                     
                        
                        
                        
                        
                     
                     
                        
                           | Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |  
                           
                         
                           | Disconnect cable from negative auxiliary battery terminal | Perform steering sensor zero point calibration | Lane Departure Alert System (w/ Steering Control) | 
                                 
                                    
                                       
                                          ![2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; PRE-COLLISION: PRE-COLLISION SYSTEM (for HV Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Pre-collision System |  
                           | Intelligent Clearance Sonar System* |  
                           | Lighting System (for HV Model with Cornering Light) |  
                           | Memorize steering angle neutral point | Parking Assist Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM(for HV Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Panoramic View Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Replacement of clearance warning ECU assembly | 
                                 
                                    
Measure ultrasonic sensor detection angle
Steering angle zero point learning
Register bumper type
Register ultrasonic sensor detection angle
 | 
                                 
                                    
Intelligent Clearance Sonar System
Intuitive Parking Assist System
 | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for HV Model): CALIBRATION](/t3Portal/stylegraphics/info.gif)  |  CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Click here
                        
                           
                              ![2019 - 2022 MY Avalon HV [04/2018 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): PRECAUTION](/t3Portal/stylegraphics/info.gif)    PROCEDURE1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY Click here
                        
                           
                              ![2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Front Passenger Side): REMOVAL](/t3Portal/stylegraphics/info.gif)  ![2021 MY Avalon Avalon HV [08/2020 - 08/2021]; SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Front Passenger Side): REMOVAL](/t3Portal/stylegraphics/info.gif)  2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Click here
                        
                           
                              ![2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+](/t3Portal/stylegraphics/info.gif)  3. REMOVE ECU INTEGRATION BOX RH Click here
                        
                           
                              ![2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; NETWORKING: NETWORK GATEWAY ECU: REMOVAL+](/t3Portal/stylegraphics/info.gif)  4. REMOVE CLEARANCE WARNING ECU ASSEMBLY (a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the clearance warning ECU assembly as shown in the illustration.   
                     
                        
                        
                     
                     
                        
                           | *a | Protective Tape |  
                           |   | Remove in this Direction |  
                     NOTICE: 
                        
If the ECU integration box is deformed or damaged, replace it.
Do not bend the claw more than necessary.
 |