| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B1XK |
| Model Year Start: 2019 | Model: Avalon | Prod Date Range: [04/2018 - ] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM (for Gasoline Model): C1ABC; Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete; 2019 - 2022 MY Avalon [04/2018 - ] | ||
|
DTC |
C1ABC |
Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete |
DESCRIPTION
This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor LH.
HINT:
This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that a beam axis inspection is performed. Completing the beam axis inspection after replacing a blind spot monitor sensor prevents this DTC from being output.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1ABC |
Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete |
A beam axis inspection has not been performed |
Blind spot monitor sensor LH |
PROCEDURE
|
1. |
PROCEED TO TEST MODE (BLIND SPOT MONITOR BEAM AXIS INSPECTION) |
(a) Change the blind spot monitor sensor LH to Test Mode using the Techstream.
HINT:
Refer to Blind Spot Monitor Beam Axis Inspection.
Click here
![2019 - 2022 MY Avalon Avalon HV [04/2018 - ]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: ADJUSTMENT](/t3Portal/stylegraphics/info.gif)
| NEXT |
|
END |
|
|