| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B1U0 |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - ] |
| Title: HORN: RELAY: ON-VEHICLE INSPECTION; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT HORN RELAY
|
*a |
Component without harness connected (HORN Relay) |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Auxiliary battery voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 |
Auxiliary battery voltage applied between terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the HORN relay.
|
|