| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B1NH |  
                        | Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 -                    
                                       ] |  
                        | Title: LIGHTING (EXT): STOP LIGHT SWITCH: ON-VEHICLE INSPECTION; 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ] |  ON-VEHICLE INSPECTIONPROCEDURE1. INSPECT STOP LIGHT SWITCH ASSEMBLY   
                     
                        
                        
                     
                     
                        
                           | *a | Front view of wire harness connector (to Stop Light Switch Assembly) |  (a) Disconnect the A33 stop light switch assembly connector. (b) Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below. Standard Voltage:  
                     
                        
                        
                        
                     
                     
                        
                           | Tester Connection | Condition | Specified Condition |  
                           | A33-7 (B) - A33-2 (GND) | Always | 11 to 14 V |  
                           | A33-6 (B) - A33-2 (GND) | Power switch on (IG)*1 | 11 to 14 V |  
                           | Engine switch on (IG)*2 |  
                     
                        
*1: for HV Model
*2: for Gasoline Model
 Standard Resistance:  
                     
                        
                        
                        
                     
                     
                        
                           | Tester Connection | Condition | Specified Condition |  
                           | A33-2 (GND) - Body ground | Always | Below 1 Ω |  If the result is not as specified, repair or replace the wire harness or connector. 
                     
                        
                           | (c) Connect the A33 stop light switch assembly connector. | 
                                 
                                    |   |  
                                    | 
                                          
                                             
                                             
                                          
                                          
                                             
                                                | *a | Component with harness connected (Stop Light Switch Assembly) |  |  |  (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:  
                     
                        
                        
                        
                     
                     
                        
                           | Tester Connection | Condition | Specified Condition |  
                           | A33-1 (OUT) - A33-2 (GND) | Power switch off, brake pedal not depressed*1 | Below 1 V |  
                           | Engine switch off, brake pedal not depressed*2 |  
                           | A33-1 (OUT) - A33-2 (GND) | Power switch off, brake pedal depressed*1 | 11 to 14 V |  
                           | Engine switch off, brake pedal depressed*2 |  
                           | A33-3 (L) - A33-2 (GND) | Power switch off, brake pedal not depressed*1 | Below 1 V |  
                           | Engine switch off, brake pedal not depressed*2 |  
                           | A33-3 (L) - A33-2 (GND) | Power switch off, brake pedal depressed*1 | 11 to 14 V |  
                           | Engine switch off, brake pedal depressed*2 |  
                           | A33-4 (ACC) - A33-2 (GND) | Always | 11 to 14 V |  
                           | A33-5 (L) - A33-2 (GND) | Power switch on (IG), brake pedal not depressed*1 | 11 to 14 V |  
                           | Engine switch on (IG), brake pedal not depressed*2 |  
                           | A33-5 (L) - A33-2 (GND) | Power switch on (IG), brake pedal depressed*1 | Below 1 V |  
                           | Engine switch on (IG), brake pedal depressed*2 |  
                     
                        
*1: for HV Model
*2: for Gasoline Model
 If the result is not as specified, replace the stop light switch assembly. |