| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B1ME |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - ] |
| Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. INSTALL REAR COMBINATION LIGHT ASSEMBLY
(a) Engage the grommet.
(b) Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.
|
*a |
Pin |
|
*b |
Guide |
|
Install in this Direction |
(c) Install the rear combination light assembly with the 2 screws.
(d) Remove the protective tape.
(e) Engage the clamp.
(f) Connect the connector.
2. INSTALL REAR COMBINATION LIGHT COVER
(a) Engage the 5 claws to install the rear combination light cover as shown in the illustration.
|
|
Install in this Direction |
3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH (for LH Side)
Click here
![2019 - 2022 MY Avalon Avalon HV [04/2018 - ]; DOOR / HATCH: LUGGAGE COMPARTMENT DOOR SUPPORT: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH (for RH Side)
Click here
5. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for RH Side)
for HV Model:
Click here
6. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD
Click here
7. INSTALL REAR FLOOR FINISH PLATE
Click here
8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
Click here
9. INSTALL BAGGAGE HOLDER NET
Click here
10. INSTALL SPARE WHEEL COVER ASSEMBLY
Click here
|
|